| Filtered Connector Quality Acceptance Test Specifications |
|
All filtered connectors undergo extensive testing
to assure that all product meets our high quality
expectations. Many of the tests are performed 100%
as routine and others are carried out on a sample
basis when this is deemed more meaningful.
|
Visual
The connectors shall be manufactured and processed
in a careful and workmanlike manner in accordance
with good design and sound practice. All connectors
shall be checked 100% to insure dimensions are as
shown in this catalog.
|
Capacitance
Checked on 100% of the contacts per detailed
specifications when measured @ 25°C, 1 KHz, 0.1 to
1.0VRMS. On insulated feed-thru lines, the maximum
capacitance is 25 pF.
|
Dissipation factor
4% maximum, checked 100% @ 25°C, 1KHz, 0.1 to 1.0VRMS
|
Dielectric withstanding voltage
Performed on 100% of the filtered contacts. The test
voltage unless otherwise specified will be 2.5 times
the working voltage as specified at 25°C. This voltage
will be applied for 1 to 5 seconds with the charging
current limited to 50 milliamps.
|
|
|
 Contact a Compliance Representative |
Insulation resistance
Performed on 100% of the filtered contacts at
25°C. The minimum acceptance level will be 1000
megohms at 25°C and 100 megohms at 125°C if
required. This test will be carried out in accordance
with MIL-STD-202 Method 302, test voltage of
100VDC or at rated voltage whichever is less.
|
Insertion loss
Performed on a sample quantity of filtered contacts, minimum
acceptance levels as specified by typical insertion
loss graphs.
|
Resistance to ground
The RDC on ground lines is 5 milliohms max.
|
Marking
As a minimum, all connectors shall have the Spectrum
part number, date code and logo. Upon request,
customer specified marking can be incorporated
into the manufacturing cycle.
|
Special Testing
Spectrum has a fully qualified test laboratory and is
willing to provide additional acceptance testing upon
customers request, at minimal additional costs.
|
|
Minimum Design Specifications
All of the filtered connectors are designed to meet minimum standards shown in table below.
|
| Environmental Performance |
| Test* |
MIL-STD-1344 |
MIL-STD-202 |
|
| Description |
Method |
Condition |
Method |
Condition |
Comments** |
| Vibration |
- |
- |
204 |
G |
30G for 10 to 2000 Cycles |
| Thermal Shock |
- |
- |
107 |
A-1 |
Except Step 3 is +125 degrees C |
| Immersion |
1016 |
- |
104 |
A |
- |
| Salt Spray |
1001 |
- |
101 |
B |
- |
| Moisture Resistance |
1002 |
II |
106 |
- |
Except Step 7 |
| Shock |
2004 |
- |
213 |
I |
- |
| Barometric Pressure |
3001 |
- |
105 |
C |
125% rated voltage |
| Resistance to Solder Heat |
- |
- |
210 |
B |
- |
| Terminal Strength |
- |
- |
211 |
A |
The applied force shall be 5 lbs. |
| Contact Resistance |
- |
- |
307 |
- |
.0152 max. |
| Life |
- |
- |
108 |
D |
1000 hrs. |
| Durability |
- |
- |
- |
- |
500 cycles |
| Solderabilty |
- |
- |
208 |
- |
- |
|
|
|
|
|
|
|
|
Spectrum Control Inc. respects the privacy of its website visitors.
All information recieved through our website will remain confidential
and will only be used to identify and better serve our customers.
Cookies are only used on our site to enhance and expedite the user's
experience within our web applications.
|
Spectrum Control, Inc.