|
The Series 400 (Series F) filtered D-subminiature connectors incorporate a solid slab of ferrite material as the filtering element. This rugged one piece design provides a compact connector that is a drop-in replacement for standard connectors. The ferrite material has been chosen for optimum filtering performance in the 10 to 300 MHz. range.
Features
- Low cost, high performance ferrite filter
- No distortion of wave forms
- Replaces individual ferrite bead filters, saving cost and space
- Provides both pin to ground and pin to pin filtering
- Effective in helping meet requirements of FCC, VDE, EN55022 and Japan’s VCCI
- Short, space saving .318" footprint
- Interchangeable with standard D-subminiature connectors
- Can be installed directly over PCB trace pattern with no shorting
- 4–40 UNC locking insert eliminates loose hardware
- Metal shielding front shell
- Gold plated contacts
- RoHS Compliant with exemption 7. Fully compliant versions available.
Mechanical Specifications
| Shells |
Steel (Tin Plated) |
| Housing |
UL 94V-0 Rated thermoplastic, black |
| Contacts |
Phosphor Bronze (sockets) or Brass (pins) |
| Contact Plating |
Gold Flash (<10µ in.) over Nickel |
| Operating Temperature |
–40 C to +105 C |
Electrical Specifications
| Frequency Range |
10 - 300 MHz |
| Current Rating |
5 Amps |
| Dielectric Withstanding Voltage |
1000 VAC for one minute |
| Insulator Resistance |
1000 Megaohms Min. @ 500 VDC |
|
|
