|
This new knurled filter is designed to be pressed into place and create a reliable mechanical bond. This feature makes it an excellent selection for applications where soldering is undesirable. Suitable plating is available that allows gold bonding to the terminals.
Applications
These filters are ideal for microwave and RF applications such as attenuators, synthesizers, and oscillators. They perform well in high impedance circuits where large capacitance values are not practical.
Installation
- .136" to .137" (3.45-3.48mm) diameter hole
- Hole must be free of all insulating materials.
- Installation tool must have a hole of sufficient depth and diameter to accept the terminal of the filter.
- Installation force must be applied gradually and smoothly until the flange of the filter is seated against the receiving part (request installation instructions).
Mechanical Specifications
| Installation |
Press-in |
| Plating |
Gold |
| Seal |
Glass sealed on one end, resin sealed on the other end |
| Termination Options |
Plating suitable for gold bonding |
| Operating Temperature |
-55°C to +125°C |
|
|
| Part Number |
Figure |
Rated Voltage
125°C |
I Amp |
Min Cap |
Minimum Insertion Loss (dB) |
1
MHz |
10
MHz |
30
MHz |
100
MHz |
300
MHz |
1
GHz |
10
GHz |
| DC |
| SCI-9925-153 |
1 |
50 |
5 |
0.015 µF +100%/-0% |
7 |
25 |
30 |
40 |
40 |
60 |
60 |
| SCI-9925-303 |
1 |
50 |
5 |
0.030 µF +100%/-0% |
10 |
30 |
35 |
45 |
50 |
55 |
55 |
| SCI-9925-502 |
1 |
100 |
5 |
5000 pF +100%/-0% |
- |
15 |
20 |
30 |
35 |
45 |
55 |
| SCI-9925-000 |
1 |
200 |
5 |
10 pF max. |
- |
- |
- |
- |
- |
10 |
10 |
| SCI-9925-101 |
1 |
200 |
5 |
100 pF +100%/-0% |
- |
- |
- |
3 |
10 |
20 |
28 |
| SCI-9925-501 |
1 |
200 |
5 |
500 pF +100%/-0% |
- |
- |
- |
15 |
22 |
35 |
40 |
| SCI-9925-122 |
1 |
200 |
5 |
1200 pF +100%/-0% |
- |
5 |
10 |
20 |
28 |
35 |
45 |
|
