Power Entry Modules
Features
- High Frequency Available
- Designed to perform in industrial environments
- Ideally suited for products that must conform to FCC part 15 regulations
- Meets over-voltage of IEC 644 category II and complies with IEC 950
- Metal case provides maximum isolation that optimizes performance.
- UL recognized, CSA certified, TÜV approved (tested and found to be in accordance with VDE 0565 Part 3)
Typical Electrical Characteristics
| Max. Insertion Loss Range |
Effective filtering from 100 KHz to 30 MHz |
| Temperature Range |
-25°C to +85°C |
| Leakage Current Range |
0.35 ma to 0.50 mA max
0.005 mA to 0.10 mA max (medical use) |
|
|
Bolt-in Rear Terminals
Bolt-in Right Angle Terminals
High Frequency Bolt-in with Solder Lugs
Snap-in with Wire Leads
Fused Filtered
Switched and Fused Filtered